Kids tool set safety
How to Clean Plastic Toys Safely: Building Sets, Small Parts and Battery Toys

In this guide
- Quick answer
- Cleaning vs. sanitizing vs. disinfecting: what plastic toys actually need
- What you need: a simple toy-cleaning kit
- How to clean plastic toys step by step
- How to clean plastic toys in the dishwasher (and when not to)
- How to sanitize plastic toys when it actually matters
- Cleaning toys with batteries and electronics
- Cleaning small parts: nuts, bolts, gears and building pieces
- Tricky cleaning jobs: stickers, safety glasses and sticky messes
- How often to clean plastic toys
- Inspect while you clean: repair, replace or retire
- Common mistakes when cleaning plastic toys
- Frequently asked questions
The simplest answer to how to clean plastic toys is this: wash them in warm water with a mild dish soap, scrub the seams with a soft brush, rinse well, and let them air dry completely. Sanitize only when there’s a real reason, such as mouthing, illness or a playdate, and keep water away from anything with batteries or a motor. Everything below explains how to do that well for building sets, tiny parts and electronic toys without damaging them.
Plastic building toys and pretend tool sets get handled constantly, dropped on floors, carried outside and occasionally chewed. The good news is that hard plastic is one of the easiest toy materials to keep clean. The tricky parts are the small pieces, the stickers and the electronics, and that’s where most cleaning mistakes happen.
Quick answer
- Everyday cleaning: warm water, a few drops of unscented dish soap, a soft brush, a clean-water rinse, and full air drying on a towel.
- Sanitizing: clean with soap first, then use a product labeled for sanitizing and follow the label’s dilution and contact time exactly. Rinse mouthed toys afterward.
- Battery toys: remove batteries, wipe with a damp (never wet) cloth, use cotton swabs around buttons, and never submerge.
- Small parts: wash them in a mesh bag, colander or salad spinner basket, count them before and after, and keep them away from children under 3.
- Dishwasher: fine for many hard plastic toys on the top rack, but never for electronics, stickered parts or thin, soft plastic.
- Inspect while you clean: cracks, sharp edges and loose parts matter more than a few germs.
Cleaning vs. sanitizing vs. disinfecting: what plastic toys actually need
Before you reach for the strongest bottle under the sink, it helps to know what each word means, because the right method depends on the goal.
Cleaning removes dirt, grime and many germs from a surface using soap, water and scrubbing. Sanitizing reduces germs to a lower level using a product labeled for that purpose. Disinfecting kills a broader range of germs on a surface using a stronger product, also according to its label.
For most plastic toys most of the time, cleaning is enough. Soap and friction physically lift dirt and germs off the surface, and the rinse carries them away. Sanitizing and disinfecting are tools for specific situations, not a daily routine.
Why cleaning always comes first
Sanitizers and disinfectants work poorly on dirty surfaces. Dried juice, sand, play dough and skin oils can shield germs from the chemical, so a wipe over a grimy toy does less than you’d expect. That’s why every reliable cleaning routine starts with soap and water, even when you plan to sanitize afterward.
When you can skip the stronger products
Strong chemicals also leave residues that young children can transfer to their hands and mouths. If a toy isn’t being mouthed, hasn’t been shared outside your household, and nobody has been sick, a soap-and-water wash is the sensible choice. Less chemical exposure, less wear on the plastic, and less work for you.
If you’re thinking about which plastics are a good choice in the first place, our guide to non toxic plastic toys covers what to look for on labels before a toy ever comes home.
What you need: a simple toy-cleaning kit
You don’t need special toy cleaners. A small, dedicated kit makes the job faster and keeps toy-cleaning supplies separate from harsher household products.
Basic kit:
- Mild, unscented liquid dish soap
- A soft-bristle brush (a clean dish brush or a soft toothbrush you use only for toys)
- Microfiber cloths, at least two: one for washing, one for rinsing
- Cotton swabs and a few wooden toothpicks for seams, hinges and screw holes
- A large mesh laundry bag, colander or salad spinner basket for small parts
- Clean bath towels for drying
- A plastic tub or dish basin, so you’re not washing small pieces directly in the sink
Optional for sanitizing:
- Plain, unscented household bleach, or a sanitizer or disinfectant spray or wipe labeled for hard, nonporous surfaces
- 3% hydrogen peroxide (the common drugstore strength), for spot use on some hard plastics
- Isopropyl rubbing alcohol, for small electronic surfaces and sticky residue
- Disposable gloves
Store this kit high up or locked away, just like other cleaning products. A child who watches you clean toys may want to “help” later, and cleaning chemicals look surprisingly like toy supplies to a curious preschooler.
How to clean plastic toys step by step
This is the core routine for hard plastic toys without batteries: building beams, gears, toy hammers, wrenches, rulers, screwdrivers, play food, blocks and similar items. It takes about 15 to 30 minutes for a full set, most of which is drying time you don’t have to supervise.
Step 1: Sort before you wash
Separate the toys into three piles:
- Hard plastic, no electronics: these can be washed in water.
- Electronic or battery toys: these get the wipe-down method in a later section.
- Anything with fabric, cardboard, wood or paper stickers: these need gentler handling or a different method entirely.
Sorting first prevents the most common accident, which is a battery toy dropped into a sink full of water along with everything else.
Step 2: Rinse off loose dirt
Shake off sand and crumbs outdoors or over a trash can. Give large pieces a quick rinse under warm running water. If small parts are involved, put them in your mesh bag or colander first so nothing disappears down the drain.
Step 3: Wash in warm, soapy water
Fill a basin with warm water, comfortable to your hands, and add a few drops of dish soap. Hot water isn’t necessary and can soften or warp some plastics. Let very grimy toys soak for five to ten minutes.
Then scrub. Focus your brush on:
- Seams where two plastic halves meet
- Textured grips on handles
- Holes in beams and the inside of nuts
- Gear teeth
- The tips of screwdrivers and the jaws of wrenches, where hands grip most
Step 4: Rinse thoroughly
Rinse every piece in clean water until no suds remain. Soap residue attracts dirt and leaves a slightly sticky film, especially on textured surfaces. For a large batch, a second basin of clean water works better than running the tap.
Step 5: Dry completely
Spread toys in a single layer on a clean towel. Turn them over after an hour or so, and tip hollow pieces so water drains out of any openings. Let everything air dry fully before you put it away, ideally overnight for anything with hollow sections.
Packing damp toys into a closed bin or toolbox creates the warm, moist environment where mildew and odors start. This is one of the easiest problems to prevent and one of the more annoying ones to fix.
A note on hollow toys with holes
Some plastic toys, especially squeeze-style bath toys, have a small hole that draws water inside and can’t be dried properly. If you can see dark spots inside or water that looks cloudy when squeezed out, it’s usually time to retire that toy. For building and tool toys, hollow handles are typically sealed, but check for cracks that might let water in during washing.
How to clean plastic toys in the dishwasher (and when not to)
The dishwasher is a real time-saver for a big batch of hard plastic pieces, but it isn’t right for every toy. Always check the toy’s instructions or packaging first, since some manufacturers specifically say hand wash only.
Toys that usually do fine in the dishwasher
- Solid, thick, hard plastic pieces with no electronics
- Plastic building pieces, gears and shapes
- Toy hammers, wrenches and screwdrivers made entirely of plastic
- Stacking cups, play dishes and similar sturdy items
Toys to keep out of the dishwasher
- Anything with batteries, a motor, lights or sound
- Pieces with stickers or printed decals, which can peel or fade
- Thin, soft or flexible plastic that can warp
- Toys with fabric, wood, cardboard or metal springs
- Safety glasses and anything with a clear lens that could scratch or cloud
How to load toys safely
Use the top rack only, where heat is gentlest. Put small pieces inside a mesh laundry bag or a lidded dishwasher basket and secure it so it can’t open. Choose a normal cycle and turn off the heated dry setting, then let the toys air dry on a towel.
It’s best to run toys separately from heavily soiled dishes, or at least avoid a load with greasy pans. After the cycle, check every piece for warping before handing it back. A beam that’s bent even slightly won’t line up with its holes anymore, which turns building into frustration.
How to sanitize plastic toys when it actually matters
Sanitizing is worth the extra step in a handful of situations. Outside of those, regular cleaning does the job.
When to sanitize
- After someone in the house has been sick and handled the toys
- After a playdate or group setting where toys were shared and mouthed
- For toys a baby or toddler regularly puts in their mouth
- When a toy has touched something unsanitary, such as a bathroom floor or pet mess
- Before passing toys along to another family
For questions about a specific illness, how contagious it is, or when a child can return to sharing toys, your pediatrician is the right person to ask. This guide covers the cleaning, not the medical side.
The basic sanitizing method
- Clean the toys with soap and water first, as described above.
- Choose a product labeled for sanitizing or disinfecting hard, nonporous surfaces.
- Follow the label’s directions for dilution, how long the surface must stay wet (the contact time), and ventilation.
- Rinse toys that go in mouths with clean water afterward, unless the label specifically says no rinse is needed for food-contact surfaces.
- Air dry completely.
The contact time is the step most people skip. Many sanitizers need the surface to stay visibly wet for a set number of minutes. A quick swipe that dries in seconds may not reach that time.
Comparing common options
| Option | Good for | Not good for | Key cautions |
|---|---|---|---|
| Dish soap and water | Everyday cleaning of all hard plastic toys | Electronics (submerging), cardboard | Rinse well so no film remains |
| Diluted household bleach | Sanitizing sturdy hard plastic after illness | Electronics, painted or printed surfaces, fabric | Use plain unscented bleach, follow label dilution, never mix with vinegar or ammonia, rinse and air dry |
| Labeled sanitizing or disinfecting wipes and sprays | Quick sanitizing of large pieces and toolbox surfaces | Small parts (hard to keep wet), mouthed toys without rinsing | Keep surface wet for full contact time, rinse mouthed toys |
| 3% hydrogen peroxide | Spot sanitizing some hard plastics | Colored plastics that might lighten, electronics | Test on a hidden spot first |
| Isopropyl rubbing alcohol | Electronic surfaces, sticky residue | Clear plastics and printed details, which can cloud or wear | Use on a cloth or swab, not poured, and test first |
| White vinegar | Hard water spots, light grime | Sanitizing after illness | Not registered as a disinfectant; never mix with bleach |
| Steam cleaners | Some sturdy, heat-tolerant items | Most plastic toys | Heat can warp plastic; check toy instructions |
A word about “natural” cleaners
Vinegar, baking soda and lemon are handy for some household jobs, and baking soda paste can help lift stubborn grime. But none of them is a reliable sanitizer. If germs are the concern, use a product designed and labeled for that purpose, then rinse. If grime is the concern, soap and water already does the job.
Mixing cleaners is never okay
Never combine bleach with vinegar, ammonia, rubbing alcohol or other cleaning products. Some combinations release harmful gases. Use one product at a time, rinse between products, and work in a ventilated room.
Cleaning toys with batteries and electronics
Electronic toys need a different approach because water is their main enemy. Toy drills, toys with lights and sound, and remote-control vehicles all fall into this category, and a single soak can ruin the motor or corrode the battery contacts.
Step-by-step method for battery toys
- Power down and remove batteries. Open the battery compartment and take them out. If the battery is sealed and not removable, switch the toy off and follow the manufacturer’s cleaning instructions.
- Dust and debris first. Use a dry soft brush to sweep crumbs and sand out of seams, triggers and the chuck or bit area of a toy drill.
- Wipe with a damp cloth. Dip a microfiber cloth in warm water with a drop of dish soap, then wring it out until it’s barely damp. Wipe all outer surfaces.
- Detail the crevices. Use a cotton swab, lightly dampened, around buttons, triggers and switch edges. A wooden toothpick gently clears gunk from tight seams.
- Wipe again with clean water. Use a second cloth, also barely damp, to remove soap.
- Sanitize if needed. A cloth or swab lightly moistened with isopropyl alcohol works for many electronic toy surfaces, since it evaporates quickly. Test it on an inconspicuous spot first, and keep it away from printed labels you want to keep.
- Dry fully before reassembly. Leave the battery compartment open and let the toy air dry for several hours before reinserting batteries.
What to avoid with electronic toys
- Spraying any liquid directly onto the toy
- Submerging, running under the tap, or putting in the dishwasher
- Getting moisture into vents, speaker holes, the battery compartment or the motor opening
- Using a hair dryer on high heat to speed drying
Check the battery compartment while it’s open
Cleaning time is the perfect moment to inspect batteries. Look for white, crusty or greenish residue on the contacts, which signals leakage or corrosion. Make sure the compartment cover closes firmly and any screw holding it shut is still secure.
Battery compartments that open easily are a hazard for young children, and leaking batteries need careful handling. Our guide to toy battery safety walks through how to deal with corrosion and how to dispose of old batteries properly.
Toy drills specifically
A toy drill tends to collect the most grime of anything in a tool set, because small hands grip the handle and trigger hard and often. The bit end also picks up debris from bolts and beams. Give the grip and trigger extra attention with a damp swab, and clear the bit holder with a dry brush.
The electric drill in the BuildBox kids tool set is a good example: it really drives the bolts in the box, so it gets handled constantly and deserves a regular wipe-down using the damp-cloth method above, never water. If you’re comparing options, our article on choosing an electric drill kids tool set explains which features matter for durability and day-to-day use.
Cleaning small parts: nuts, bolts, gears and building pieces
Building sets are where cleaning gets fiddly. A set with a hundred-plus pieces can lose a handful in one careless rinse, and small parts create a real safety issue if they end up scattered where a younger sibling can find them.
The colander and mesh bag method
- Count or roughly group the pieces before you start, so you know what should come back.
- Place a dish basin in the sink, or put the sink stopper in, so nothing can reach the drain.
- Pour small parts into a mesh laundry bag, a fine colander or a salad spinner basket.
- Lower the whole container into warm, soapy water and swish it around. Let it soak for a few minutes.
- Scrub pieces in small handfuls with your soft brush. A toothbrush works well for threads on bolts and the inside of nuts.
- Rinse the container in a second basin of clean water, shaking it gently.
- If you used a salad spinner, give it a few spins to remove most of the water.
- Spread everything in a single layer on a towel to air dry, and flip pieces once.
Threads on bolts and the inside of nuts hold water longer than you’d think. Give them extra drying time, especially before packing them tightly into compartments.
Keep children under 3 away during cleaning
Small parts drying on a towel at floor level are exactly the kind of thing a crawling baby or toddler will find. The U.S. Consumer Product Safety Commission’s small parts rules exist because pieces that fit in a young child’s mouth are a choking hazard, and toys with small parts carry a warning that they’re not for children under 3.
Dry small parts on a counter or table well out of reach, and do the job during a nap or when an adult can watch the area. For a fuller explanation of the rule and how to manage it in a mixed-age household, read our guide to the small parts choking hazard.
Count pieces when you pack up
Cleaning is a natural moment to take inventory. If a set has a home for every piece, you’ll notice quickly when something is missing or broken.
The Thoson BuildBox is designed so everything packs back inside the toolbox, which makes this step easier: lay out the clean, dry pieces on the opened workbench, then pack them away together. If you find a missing or broken piece, Thoson replaces it; email help@thoson.com with a photo.
Don’t forget the storage container
The bin, bag or toolbox that holds the toys collects crumbs and dust at the bottom. Empty it, shake it out, and wipe the inside with a damp soapy cloth, then a clean damp cloth. Let it dry with the lid open before refilling. A toolbox that opens into a workbench also deserves a wipe on the work surface itself, since that’s where hands, snacks and toys all meet. Our kids tool storage ideas cover ways to keep sets organized between cleanings so fewer pieces end up under the couch in the first place.
Tricky cleaning jobs: stickers, safety glasses and sticky messes
Some parts of plastic toys need a gentler touch than the basic soak-and-scrub.
Stickered and printed parts
Stickers are part of the fun in many building and tool sets, but water loosens their adhesive and soaking can lift edges. For stickered pieces:
- Don’t soak them. Wipe with a damp soapy cloth instead.
- Wipe in the direction away from the sticker’s edges, not into them.
- Pat dry rather than rubbing.
- Keep alcohol and peroxide away from stickers and printed details.
If a sticker is already peeling and gummy, it may be better to remove it fully and clean the residue, then decide whether to replace it.
Kids’ safety glasses
Toy safety glasses are worth cleaning carefully, because a scratched or cloudy lens is frustrating to look through and kids will simply take them off.
- Rinse under lukewarm water to remove grit first, so you don’t grind it into the lens.
- Wash with a drop of mild dish soap on clean fingertips.
- Rinse well.
- Dry with a soft microfiber cloth. Paper towels and tissues can scratch plastic lenses.
- Avoid alcohol, glass cleaners and strong chemicals, which can damage lens coatings or cloud the plastic.
Check the frame and arms for cracks while you’re at it. Our guide to safety glasses for kids explains why getting children used to wearing them during pretend tool play is a useful habit.
Sticky residue, crayon and marker
- Sticker glue or tape residue: soak in warm soapy water, then rub. If it stays, a dab of cooking oil on a cloth often loosens the glue. Wash again with soap to remove the oil.
- Crayon: a little baking soda on a damp cloth, rubbed gently, lifts most crayon from smooth plastic.
- Washable marker: usually comes off with soap and water. Permanent marker may respond to rubbing alcohol on a swab, but test a hidden spot first.
- Play dough: let it dry completely, then brush it off with a dry brush before washing. Wet play dough smears into crevices.
- Sand: shake and brush dry first. Sand in water turns into grit that can scratch plastic as you scrub.
Outdoor and sandbox toys
Building toys that go outside pick up more than dust. Rinse them with a hose or in a bucket outdoors first to remove the bulk of the dirt, then bring them in for a proper soapy wash. Check for insects nesting in hollow pieces and for sun-faded plastic that has turned brittle.
How often to clean plastic toys
There’s no single schedule that fits every family. The right frequency depends on how a toy is used, who uses it, and whether it goes in mouths. This table gives practical starting points.
| Toy situation | Routine cleaning | When to also sanitize |
|---|---|---|
| Toys a baby or toddler mouths | Daily or after each mouthing session | After illness, or regularly if shared |
| Building sets and tool sets used daily | Quick wipe weekly, full wash monthly | After illness or playdates |
| Battery and electronic toys | Damp wipe weekly or when visibly dirty | After illness, using a method safe for electronics |
| Toys shared at playdates, school or daycare | After each shared session | Often, especially if mouthed |
| Outdoor and sandbox toys | After each outdoor session | Rarely needed unless soiled |
| Shelf toys handled occasionally | Dust regularly, wash seasonally | Only if a specific reason arises |
Signs a toy needs cleaning now
- It feels tacky or sticky to the touch
- There’s a smell, even a faint one
- You can see grime in seams or on grips
- It’s been dropped somewhere unsanitary
- It came back from another home, a classroom or a waiting room
A five-minute weekly reset, where toys go back into their bin and the worst offenders get a quick wipe, keeps big cleaning sessions short.
Inspect while you clean: repair, replace or retire
Cleaning sessions are the best time to check toy condition, because you’re handling every piece anyway. The CPSC’s toy safety guidance and Nemours KidsHealth both encourage parents to check toys regularly for breakage and potential hazards, and a damaged toy is often a bigger risk than a dirty one.
What to look for
- Cracks and splits in plastic, especially on handles and hollow pieces
- Sharp edges or points from wear or breakage
- Small pieces breaking off larger toys, which can create new choking hazards
- Loose battery covers or missing screws on electronic toys
- Warping from heat, which can stop parts fitting together
- Stripped threads on bolts and nuts, which make building frustrating
- Brittle, chalky or faded plastic, often from sun exposure
Repair, replace or retire
| What you find | What to do |
|---|---|
| Missing or broken piece from a set | Contact the manufacturer about a replacement part |
| Loose battery cover screw | Tighten it, and check it again next cleaning |
| Crack in a load-bearing piece or handle | Retire the piece |
| Sharp edge from breakage | Retire the piece; don’t sand or file it as a fix |
| Corroded battery contacts | Follow battery safety guidance before reusing |
| Warped piece that no longer fits | Replace or retire it |
If you’re keeping a set long-term, our kids tool set safety guide has a fuller checklist for ongoing inspection and age-appropriate supervision.
Common mistakes when cleaning plastic toys
Most cleaning problems come from a few repeated habits. Avoiding them protects both your kids and the toys.
Using too much heat
Boiling water, steam cleaners and dishwasher heated dry cycles can warp plastic, especially thinner pieces. Warm water does the job without the risk.
Sanitizing without cleaning first
A quick wipe with a disinfectant over a dirty toy doesn’t do much. Wash first, then sanitize, and respect the label’s contact time.
Skipping the rinse on mouthed toys
Chemical residue on a toy that goes straight back into a toddler’s mouth is avoidable. Rinse with clean water after sanitizing unless the product label says otherwise for food-contact surfaces.
Soaking electronics
Even a short dunk can damage a motor or corrode battery contacts. Electronics always get the damp-cloth treatment.
Losing small parts down the drain
Always plug the sink or use a basin, and wash small pieces inside a mesh bag or colander. It only takes one missing bolt to stall a building project.
Putting toys away damp
Moisture trapped in a closed bin leads to musty smells and mildew. Dry overnight when you can, especially for threaded pieces and anything hollow.
Mixing cleaning products
Never combine bleach with vinegar, ammonia or other cleaners. One product at a time, rinsed between uses, in a ventilated space.
Leaving supplies where kids can reach
Cleaning sprays and wipes are often left out on the counter after a toy session. Put them away before the toys go back into circulation.
Once you know how to clean plastic toys properly, the routine becomes quick and almost automatic: sort, wash, rinse, dry, inspect, pack away. That rhythm keeps building sets and tool toys hygienic, safe and ready for the next project, and it often turns into a good moment to involve older kids in caring for their own things.
Frequently asked questions
What is the best way to clean plastic toys?
For everyday cleaning, warm water and a mild, unscented dish soap work best. Scrub with a soft brush or cloth, paying attention to seams and holes, rinse well with clean water, and let the toys air dry completely on a towel. Save sanitizers for toys that have been mouthed, shared with other children, or handled during an illness, and keep all water away from battery compartments and electronics.
Can you put plastic toys in the dishwasher?
Many hard plastic toys without electronics can go on the top rack of a dishwasher, inside a mesh bag or a lidded utensil basket so small parts do not fall through. Skip the heated dry setting to reduce the risk of warping, and let them air dry instead. Never put battery-operated toys, toys with stickers or printed decals, or thin, soft plastic in the dishwasher, and check the toy's instructions first.
Does vinegar disinfect kids' toys?
Vinegar is a useful cleaner for hard water spots and some grime, but it is not registered as a disinfectant or sanitizer, so it should not be relied on to kill germs after an illness. For routine cleaning, soap and water is enough. If you need to sanitize, use a product labeled for that purpose and follow the label. Never mix vinegar with bleach, because the combination releases harmful gas.
How do you sanitize toys after a child has been sick?
First wash the toys with soap and water to remove visible dirt, since sanitizers work poorly on grimy surfaces. Then apply a product labeled for sanitizing or disinfecting hard surfaces, following the label's dilution and contact time exactly. Rinse toys that go in mouths with clean water and air dry them fully. For guidance about your child's specific illness and when they can share toys again, ask your pediatrician.
How do you clean toys with batteries?
Remove the batteries first, or switch the toy off if the battery is sealed. Wipe the outside with a cloth that is damp, not wet, using a little mild soap, then wipe again with a clean damp cloth. Use cotton swabs around buttons and seams and keep moisture away from the battery compartment, vents and motor openings. Let everything dry fully before putting batteries back in, and never submerge an electronic toy.
Can you use disinfecting wipes on kids' toys?
Disinfecting wipes can be used on hard plastic toys, but read the label first. Many wipes say surfaces that touch food or mouths should be rinsed with water afterward, and the surface usually needs to stay visibly wet for a set time to work. For toys a young child mouths, wipe, wait the labeled time, then rinse or wipe with a clean damp cloth and let the toy air dry.
How often should you clean kids' toys?
It depends on how the toy is used. Toys a baby or toddler mouths deserve frequent washing, often daily. Shared building sets and tool sets do well with a weekly wipe-down and a deeper clean every month or so. Clean right away after spills, outdoor play, playdates or illness. Toys that live on a shelf and are rarely handled can be dusted and washed occasionally, such as seasonally.
How do you clean small toy parts like nuts, bolts and building pieces?
Put the small pieces in a mesh laundry bag, colander or salad spinner basket so nothing escapes down the drain. Soak them in warm soapy water, swish and scrub with a soft brush, then rinse in clean water. Spread them on a towel in a single layer to air dry, turning them once. Count pieces before and after, and keep loose small parts away from children under 3 throughout.
How do you get sticky residue off plastic toys?
Start gently with warm soapy water and a soft cloth, letting the residue soak for a few minutes. If that fails, a dab of cooking oil on a cloth often loosens sticker glue, followed by a soap-and-water wash to remove the oil. Rubbing alcohol on a cotton swab can also help, but test it on a hidden spot first because it can cloud some plastics or remove printed details.
Is it safe to use bleach on plastic toys?
Diluted household bleach can sanitize hard plastic toys when used correctly. Use plain, unscented bleach, follow the label's directions for sanitizing, work in a ventilated area, and never mix bleach with vinegar, ammonia or other cleaners. Wash toys with soap first, then rinse thoroughly with clean water after the bleach step and air dry. Avoid bleach on electronics, painted surfaces and fabric parts, and store it out of children's reach.
References and sources
A kids tool set that turns into a workbench
152 pieces, a real working drill and a toolbox that opens into a bench and seat. $69 (was $109), or two for $119. Free US shipping.
See the BuildBox