Early Black Friday: $40 off BuildBoxFree US shipping
Get BuildBox

Learning, STEM and Montessori

Simple Machines for Kids: How to Teach Levers, Wheels, Gears and Screws With Toy Tools

By Kids Tool Sets editorial team Published Last updated:

Thoson BuildBox kids tool set open on a play table with a toy wrench, screwdriver, gears and bolts laid out for a simple machines lesson
In this guide
  1. Key takeaways
  2. What are simple machines? A kid-friendly definition
  3. The six simple machines for kids, explained with toy tools
  4. Where gears fit into simple machines
  5. Why toy tools are a strong way to teach simple machines
  6. How to teach simple machines for kids by age
  7. 10 simple machine activities with toy tools and household items
  8. Words and questions that make the science stick
  9. Choosing toys and tools that teach simple machines
  10. Safety while you experiment
  11. A five-day simple machines plan for home
  12. Start with one tool tonight
  13. Frequently asked questions

Simple machines for kids are the six basic tools that make work easier: the lever, wheel and axle, pulley, inclined plane, wedge and screw. The fastest way to teach them is to put them in a child’s hands. Use a toy wrench as a lever, a screwdriver as a wheel and axle, a bolt as a screw, and a book propped on a pillow as a ramp. Children feel the difference before they learn the words, and that is exactly the right order.

This guide walks through each machine with a toy-tool example, explains where gears fit, gives you age-by-age expectations, and lays out ten builds you can run at the kitchen table this week.

Key takeaways

  • A simple machine is a tool with few or no moving parts that changes the size or direction of a force so a job takes less effort.
  • There are six classic simple machines. Gears are not on the list, but they are a close relative of the wheel and axle and are perfect for teaching.
  • Toy tools are natural teaching aids: wrenches and hammers are levers, screwdrivers are wheels and axles, bolts are screws, and knives are wedges.
  • Preschoolers learn through feeling and repeating. Early elementary kids can name and compare. Older kids can measure and predict.
  • Keep sessions short, name the machine once, and ask “What changed?” more often than you explain.
  • Always match materials to age. Bolts, nuts and small gears are choking hazards for children under 3.

What are simple machines? A kid-friendly definition

A simple machine is a basic tool that helps you push, pull, lift or turn something using less force, or in a direction that is easier to use.

That one sentence is all most young children need. The bigger idea underneath it, which you can introduce gradually, is that simple machines trade one thing for another. A lever lets you lift something heavy with a small push, but you have to push farther. A ramp lets you raise a load with less effort, but you travel a longer path to get it there.

Kids grasp this trade-off surprisingly well when they feel it. Tighten a nut with fingers, then with a wrench, and they notice instantly that the wrench is easier. Ask them whether their hand moved more or less, and they will see that it moved more. That moment is the whole lesson in miniature.

Simple machines vs. compound machines

A compound machine is two or more simple machines working together. Scissors combine two levers with two wedges. A wheelbarrow is a lever riding on a wheel and axle. A bicycle uses wheels, axles, levers (the pedals) and gears. Once children can spot single machines, hunting for combinations becomes a fun next step.

The six simple machines for kids, explained with toy tools

The table below is a quick reference you can print or keep on your phone. Each row pairs a crisp definition with something a child can actually hold.

Simple machine One-sentence definition Toy-tool example Everyday example First experiment
Lever A stiff bar that pivots on a point called a fulcrum to lift or move a load. Toy wrench, hammer claw, ruler Seesaw, bottle opener, broom Ruler balanced on a marker lifting a small toy
Wheel and axle A large wheel attached to a smaller rod so that both turn together. Screwdriver handle and shaft Doorknob, faucet handle, car wheels Turn a bolt by the shaft, then by the handle
Pulley A wheel with a groove that guides a rope to change the direction of a pull. Thread spool on a pencil Flagpole, window blinds Lift a light basket by pulling down on a string
Inclined plane A flat, sloped surface that makes it easier to raise or lower a load. Board or book as a ramp Slide, wheelchair ramp, driveway Car races down ramps of different heights
Wedge Two sloped surfaces meeting at an edge, used to split, cut or hold. Kid-safe knife Doorstop, axe, zipper teeth Slice play dough with the edge vs. the flat side
Screw An inclined plane wrapped around a post. Bolts and nuts Jar lid, lightbulb base, spiral slide Paper triangle rolled around a pencil

The lever

A lever is a bar that rests on a pivot point called the fulcrum. Push down on one end and the other end lifts. The farther your push is from the fulcrum, the less force you need.

Levers come in three types, and older kids enjoy sorting them:

  1. First class: the fulcrum sits between the effort and the load. A seesaw, a crowbar, and a hammer pulling a nail all work this way.
  2. Second class: the load sits between the fulcrum and the effort. A wheelbarrow and a nutcracker are classic examples.
  3. Third class: the effort sits between the fulcrum and the load. Tongs, tweezers, a broom and a fishing rod work this way. They do not reduce effort, but they increase speed and reach.

For preschoolers, skip the classes entirely. Just say, “The long handle helps us,” and let them feel it with a toy wrench.

The wheel and axle

A wheel and axle is a large circle fixed to a smaller rod, so turning one turns the other. Turning the big wheel a little creates a strong twist on the small axle.

The screwdriver is the best toy-tool example. The fat handle is the wheel and the thin shaft is the axle. Ask your child to turn a bolt by pinching the shaft, then by gripping the handle. The handle wins every time, and they will tell you so before you ask.

Doorknobs, faucet handles and the steering wheel in the family car work the same way. Toy cars and trucks show the other use of wheels and axles: rolling loads with less friction than dragging them.

The pulley

A pulley is a wheel with a groove that holds a rope. A single fixed pulley does not reduce the effort needed, but it changes the direction: you pull down to lift something up, which is easier for your body. Adding more pulleys, as in a block and tackle, does reduce the effort.

Most toy tool sets do not include pulleys, and that is fine. A thread spool slid onto a pencil makes a working pulley in about a minute, and the flagpole at school or the blinds in the living room give kids a real-world version to watch.

The inclined plane

An inclined plane is a sloped surface that lets you raise a load gradually instead of lifting it straight up. A longer, gentler slope takes less effort but covers more distance.

This is the machine toddlers and preschoolers already know best because every slide is one. A hardcover book propped on a cushion, a cutting board leaning on a step, or a long cardboard tube cut in half all make excellent ramps.

The wedge

A wedge is two inclined planes placed back to back, coming to a thin edge. It turns a push into a sideways force that splits, cuts or holds things in place.

A kid-safe knife slicing play dough is a perfect wedge demonstration. So is a doorstop. If your child has a jacket with a zipper, the small piece that slides along it uses wedges to push the teeth together and pull them apart.

The screw

A screw is an inclined plane wrapped around a post. The spiral thread is a long ramp, and each turn moves the screw forward a short distance with less force than pushing it straight in.

Bolts and nuts from a toy tool set are ideal for teaching this. Have children count how many turns it takes to run a nut all the way down a bolt. Then point out the ridges, trace one with a fingertip, and show how it climbs around the post like a spiral slide.

Where gears fit into simple machines

A gear is a wheel with teeth around its edge that locks into another gear to pass motion along.

Gears are not one of the six classic simple machines. Most science teachers treat them as a variation of the wheel and axle, and two meshing gears form a simple gear train. Kids love them anyway, and they show three big ideas more clearly than almost anything else.

  • Direction: two touching gears always turn in opposite directions. Add a third gear in a line and the first and third turn the same way.
  • Speed: when a big gear drives a small gear, the small gear spins faster.
  • Force: when a small gear drives a big gear, the big gear turns more slowly but with more turning force. That is why the lowest gears on a bicycle make hills easier.

A simple check for kids is to put a sticker on one tooth of each gear and count turns. If the small gear goes around twice while the big gear goes around once, they have discovered gear ratios without ever hearing the term. For more ideas on choosing and using them, see our guide to gear toys for kids.

Why toy tools are a strong way to teach simple machines

Simple machines are physical ideas. Reading that a lever reduces effort is abstract. Feeling a wrench turn a stubborn nut that fingers could not move is concrete, and young children learn concrete ideas first.

The American Academy of Pediatrics clinical report The Power of Play describes play as central to how children build language, problem solving and executive function skills. NAEYC, the national early childhood education organization, similarly describes play as a primary way young children explore cause and effect and build understanding. Tool play fits squarely inside that kind of hands-on, child-directed exploration.

Toy tools also have three practical advantages over worksheets or videos:

  • They give instant feedback. The nut either tightens or it does not. The car either reaches the bottom of the ramp or it stops.
  • They invite repetition. Children will tighten and loosen the same bolt many times, and each repetition reinforces the idea.
  • They build skills alongside the science. Gripping a screwdriver, lining up a bolt and steadying a ruler all exercise hand strength and coordination.

If you want to see how tool play connects to a broader science, technology, engineering and math approach, our STEM kids tool set guide covers the bigger picture.

How to teach simple machines for kids by age

Children move through these ideas in stages. The CDC’s developmental milestones are a useful general reference for what many children can do at each age, but every child develops on their own timeline. Treat the stages below as loose guides, not checklists.

Age What they can do Best machines to start with What to say
Under 3 Push, roll, drop, repeat Ramps, large wheels “Down it goes!” “Roll it again?”
3 to 4 Turn, twist, compare “easy” and “hard” Ramps, gears, chunky bolts, wrench “Which way was easier?”
5 to 6 Name machines, sort, predict Levers, wheel and axle, screw, wedge “This is a lever. Where is the fulcrum?”
7 to 10 Measure, test variables, combine machines All six, plus gears and compound machines “What happens if we change one thing?”

Under 3: feel it, no names needed

For toddlers, simple machines are pure sensory play. Roll balls and chunky cars down a tilted board. Push large-wheeled toys. Watch big, toddler-safe gears spin.

Skip anything with small parts. Bolts, nuts, small gears and marbles are choking hazards for children under 3, and the CPSC small parts rule exists for exactly this age group. Our article on the small parts choking hazard explains how the rule works and how to read the warning labels.

Ages 3 to 4: easy vs. hard

Preschoolers are ready to compare. They can tell you which ramp made the car go faster and which tool made the nut easier to turn. They do not need the word “fulcrum” yet, but they will happily use “push,” “pull,” “turn,” “lift” and “roll.”

Keep each session under 15 minutes. Name the machine once, casually, then let them play. If they want to repeat the same ramp race twenty times, that repetition is the learning. Our list of engineering activities for preschoolers has more short challenges at this level.

Ages 5 to 6: naming and sorting

Kindergartners and first graders love vocabulary that sounds grown-up. This is the age to introduce the six names and play sorting games. Lay out a spoon, a toy screwdriver, a bolt, a doorstop and a toy car, and ask them to match each one to a machine.

They can also make simple predictions. “If we make the ramp taller, will the car go farther or shorter?” Have them guess before testing, then talk about whether the guess was right. Being wrong is part of the fun.

Ages 7 to 10: measuring and testing

Older kids can run real experiments. Change one thing at a time, measure the result and write it down. How far does a car roll from ramps of three heights? How many turns does a nut need on a bolt with fine threads compared to coarse ones? How does moving the fulcrum change how many coins it takes to lift a toy?

This is also the age for compound machines. Challenge them to find every simple machine in a bicycle, a can opener or a stapler. Rulers, tape measures and calipers turn guesses into data, and our guide to teaching kids measurement shows how to make that part playful rather than a chore.

10 simple machine activities with toy tools and household items

Each activity below takes 5 to 20 minutes and uses things most families already have. Ages are suggestions; scale up or down as needed.

1. The ruler seesaw (lever, ages 3+)

Lay a ruler across a fat marker so it balances. Put a small toy on one end and press the other end down with one finger.

Now slide the marker closer to the toy and try again. Then slide it closer to your finger. Ask which position made lifting easiest. Kids discover that the farther their finger is from the fulcrum, the less push they need. For older kids, add coins to the effort end and count how many it takes to lift the toy at each position.

2. The lid lifter (lever, ages 3+)

Snap the lid onto a plastic storage tub tightly. Let your child try to pry it off with fingers. Then hand them a spoon and show how to slide the handle under the lid edge and push down on the bowl end.

The rim of the tub becomes the fulcrum. This is the same lever action people use to open paint cans, and it is a satisfying “I did it” moment for small hands.

3. Long wrench, short wrench (lever, ages 4+)

Thread a nut onto a bolt and tighten it as much as possible with fingers. Then use a toy wrench, first holding it right near the nut, then holding it at the very end of the handle.

Most children feel the difference immediately. Holding the end of the handle gives more turning force for the same push. Ask, “Why do you think real wrenches have long handles?”

4. Handle vs. shaft (wheel and axle, ages 4+)

Start a screw or bolt with a toy screwdriver. Ask your child to turn it by pinching only the metal or plastic shaft. Then let them turn it with the handle.

Explain in one sentence: “The handle is the wheel, the skinny part is the axle, and the big wheel makes the twist stronger.” Follow up by trying a doorknob, then a faucet handle, and asking which part is the wheel.

5. The paper screw (screw and inclined plane, ages 5+)

Cut a right triangle from paper, roughly the size of an index card cut corner to corner. Color the long sloped edge with a marker. Place the triangle against a pencil and roll it up, starting from the short side.

The colored edge spirals around the pencil like a screw thread. Unroll it and you have a flat ramp again. This is the single best demonstration that a screw is an inclined plane wrapped around a post, and children often want to make several in different colors.

6. Count the turns (screw, ages 4+)

Give your child a bolt and nut. Ask them to count how many turns it takes to run the nut from the tip to the head. Then try a different bolt.

A tool set with a toy drill adds a second layer. Drive the same bolt by hand and with the drill, and talk about how the drill does the turning for you. The Thoson BuildBox, for example, includes an electric hand drill that really drives the bolts in the box, so kids can compare hand-turning and machine-turning on the same piece. If you are weighing drill features, our kids tool set with drill guide covers what matters.

7. Ramp races (inclined plane, ages 2+ with large toys, 3+ with small)

Prop a hardcover book or cutting board on a cushion to make a ramp. Roll a toy car down and mark where it stops with a piece of tape. Add a second cushion to make the ramp steeper and race again.

Then flip the question. Ask your child to push the car up the ramp at each height. Steeper ramps make cars go faster downhill but are harder to push uphill. Gentle ramps are easier to climb but take longer. That trade-off is the core idea behind every inclined plane.

8. Edge vs. flat (wedge, ages 3+)

Roll out a log of play dough. Have your child press it with the flat side of a kid-safe knife, then with the edge.

The edge cuts and the flat side just squashes. Explain that the thin edge is a wedge: it pushes the dough apart sideways. Then look for wedges around the house, such as a doorstop under a door, the front of a toy boat, or the teeth of a fork.

9. The spool pulley (pulley, ages 4+)

Slide an empty thread spool onto a pencil. Hold the pencil ends steady (an adult works well as the “pulley stand”). Drape a short piece of string over the spool and tie a small, light toy or a paper cup to one end.

Have your child pull down on the free end and watch the toy rise. Point out that they are pulling down but the toy is going up. That change of direction is what a single pulley does. Keep the string short, supervise closely, and put it away when you finish, since cords and young children are not a safe combination to leave out.

10. Gear chain challenge (gears, ages 3+)

Mount two or more gears so their teeth touch. Building sets with beams and bolts often let you fasten gears in a row, and stand-alone gear sets work too. Put a sticker on one tooth of each gear.

Turn the first gear slowly. Ask which way the second gear turns, then the third. Count how many times each gear spins. Older kids can try connecting a small gear to a big one and predicting which spins faster before they test it.

For more open-ended projects once these basics click, browse our kids tool set build ideas.

Words and questions that make the science stick

What you say during play matters more than how much you say. Short, open questions keep children thinking. Long explanations tend to end the experiment.

Starter vocabulary by stage

  • Ages 3 to 4: push, pull, turn, twist, roll, lift, easy, hard, fast, slow, up, down
  • Ages 5 to 6: lever, wheel, axle, ramp, wedge, screw, pulley, gear, load, pivot
  • Ages 7 to 10: fulcrum, effort, force, friction, inclined plane, thread, gear ratio, compound machine

Introduce one new word per session. Use it during the activity, then use it again the next day in a different setting. “Look, the faucet is a wheel and axle, just like your screwdriver.”

Questions that work better than explanations

  • “What do you notice?”
  • “What changed when we did that?”
  • “Which way was easier? Why do you think so?”
  • “What do you think will happen if we make it longer, taller or bigger?”
  • “Can you find another one in this room?”
  • “How could we make this job easier?”

When your child gives an answer that is not quite right, resist correcting right away. Ask, “Let’s test it and see.” The experiment will often correct the idea more convincingly than you could.

Mistakes adults commonly make

  • Explaining before exploring. Let children try first, then name what happened.
  • Running too long. Ten focused minutes beat forty restless ones.
  • Doing it for them. If an adult turns every bolt, the child learns to watch, not to understand.
  • Testing too many things at once. Changing ramp height and car size together makes it impossible to tell what made the difference.

Choosing toys and tools that teach simple machines

You do not need a specialized kit to teach simple machines for kids. A mix of toy tools, a few building pieces and household items covers all six. That said, some features make tool sets much better teaching aids than others.

What to look for

  • Tools that do real work on real parts. A wrench that actually turns a nut teaches leverage. A molded wrench with nothing to turn does not.
  • Bolts and nuts with visible threads. Children need to see and trace the spiral to understand screws.
  • Gears that can mesh. Loose gears are fine for sorting, but gears that connect show direction and speed.
  • A flat work surface. A tabletop or workbench keeps ramps, levers and gear trains steady.
  • Measuring tools. A ruler and calipers let older kids record results instead of guessing.
  • An age rating that matches your child. Small parts are fine at 3 and up, not before.

How different toy types compare for teaching

Different toys cover different machines well, so the right choice depends on which ideas you want to focus on.

  • Toy tool sets with bolts, wrenches and screwdrivers are strongest for levers, wheel and axle, and screws.
  • Gear sets focus tightly on gears and rotation.
  • Marble runs and ramp sets are excellent for inclined planes and motion.
  • Construction brick systems with technical parts, like the kind LEGO and similar brands make, often include wheels, axles, gears and sometimes pulleys. They suit kids who like following instructions and building complex models; check the current listing for which parts a given set includes.
  • Wooden tool benches, like the styles from brands such as Melissa & Doug or Bigjigs, offer a sturdy surface and chunky pieces that some families prefer for younger preschoolers.

Our kids tool set build ideas and broader guides on the site cover these trade-offs in more detail. If your goal is mainly levers, screws and wheel-and-axle tools, a kids tool set with working parts is a natural fit.

Where the BuildBox fits

The BuildBox kids tool set covers the tool side of this lesson well. It is a 152-piece set in a toolbox that opens into a workbench and a seat, with an electric hand drill that drives the included bolts, plus a hammer, wrench, calipers, ruler, kid-safe knife, a screwdriver set, builder safety glasses and more than 130 bolts, nuts, beams, gears and shapes. It is rated for ages 3 and up.

To be fair about what it is not: it is a tool and building set, not a dedicated physics kit. It does not come with ramps or pulleys, so you would still use books, spools and string for those activities. If your child mainly loves ramps and rolling, a marble run may hold their attention better. If you want a technical brick system with motors and pulleys for an older child, that is a different kind of product.

Safety while you experiment

Simple machine activities are low-risk, but a few habits keep them that way. Nemours KidsHealth and the CPSC both emphasize matching toys to a child’s age and checking regularly for broken or loose parts.

Core safety rules

  1. Respect the age rating. Bolts, nuts, small gears, marbles and coins are choking hazards for children under 3. Keep them out of reach when younger siblings are around.
  2. Wear safety glasses for tool play. Even with toy tools, it builds a habit kids will carry to real workshops later.
  3. Supervise cords and string. Use short lengths for pulley experiments and put them away afterward.
  4. Keep ramps low and stable. Use books and cushions on the floor rather than stacking things high.
  5. Handle batteries properly. For battery-powered toy drills, follow the manufacturer’s instructions and keep spare batteries away from small children.
  6. Clean up together. Counting pieces back into a box is good practice and catches anything that rolled under the couch.

Tool play is a great moment to teach real rules, such as “tools stay at the bench” and “glasses on before we start.” Our guide to teaching kids tool safety has age-appropriate rules and simple ways to practice them.

A note for children who learn differently

Many children with ADHD, autism or sensory differences enjoy the predictable, hands-on nature of tool play, and simple machine activities can be adapted with shorter sessions, visual steps or extra repetition. Every child is different, so if you have questions about what suits your child, their pediatrician or occupational therapist can give individual advice.

A five-day simple machines plan for home

If you want structure, this plan introduces one or two machines per day in short sessions. Each day takes 10 to 20 minutes.

Day 1: Levers

Do the ruler seesaw and the lid lifter. End by finding three levers in the house, such as a light switch, a door handle and a pair of tongs.

Day 2: Wheel and axle, plus gears

Try handle vs. shaft with a screwdriver, then the gear chain challenge. Go for a short walk and count wheels and axles: strollers, bikes, cars and wagons.

Day 3: Inclined planes and wedges

Run ramp races, then the edge vs. flat play dough test. Look for ramps and wedges in your neighborhood: curb cuts, slides, doorstops and driveways.

Day 4: Screws and pulleys

Make paper screws and count nut turns on bolts. Finish with the spool pulley. Point out jar lids, lightbulbs and window blinds.

Day 5: Scavenger hunt and build challenge

Give your child a list of the six machines and a time limit to find one example of each around the house. Then pose a challenge: “Use at least two simple machines to move this toy from the floor to the table without lifting it straight up.” A ramp plus a lever, or a pulley plus a basket, are both great answers.

By the end of the week, most children will point out machines unprompted. That noticing is the real goal.

Start with one tool tonight

You do not need a lesson plan, a science kit or a special room to teach simple machines for kids. Pick one tool your child already has, such as a wrench, screwdriver or toy car, and ask one question: “What makes this easier?” Let them experiment, name the machine once, and stop while they still want more.

Over time, those small moments add up to a child who sees how the physical world works and believes they can figure things out. A spoon, a ruler, a ramp and a few bolts are enough to start. If you want a single box that keeps the tools, bolts and gears together for repeat sessions, Thoson’s 152-piece toolbox set is one option worth a look.

Frequently asked questions

What are the 6 simple machines for kids?

The six simple machines are the lever, wheel and axle, pulley, inclined plane, wedge and screw. Each one helps people push, pull, lift or turn things with less effort, or in a more useful direction. Kids already use them every day: a seesaw is a lever, a doorknob is a wheel and axle, a slide is an inclined plane, a zipper uses wedges, and a jar lid works like a screw.

How do you explain simple machines to a child?

Tell them a simple machine is a tool with few or no moving parts that makes a job easier. Then show it instead of describing it. Have them tighten a bolt with their fingers, then with a wrench, and ask which felt easier. Name the machine afterward. Young children learn the idea through their hands first and the vocabulary second, so keep explanations to one sentence and let the experiment do the teaching.

What age do kids learn about simple machines?

Children can explore simple machines through play as early as the preschool years, long before they learn the names. Three and four year olds love ramps, gears and toy tools. Five and six year olds can start using words like lever and wheel and axle. Many elementary science programs cover forces, motion and simple machines in more detail, and kids around 7 to 10 can begin comparing and measuring how each machine works.

Is a hammer a simple machine?

Yes. A hammer is usually described as a lever. When you swing it, your wrist or elbow acts as the pivot and the long handle increases the speed of the head. When you use the claw end to pull a nail, the hammer becomes a first-class lever with the head resting on the board as the fulcrum. The claw itself is also wedge-shaped, so it slips under the nail head.

Is a gear a simple machine?

Gears are not on the classic list of six simple machines, but they are closely related. A gear is a wheel with teeth, and it is usually taught as a variation of the wheel and axle. When two gears mesh, they form a simple gear train that can change speed, force or direction. That makes gears one of the best ways to show kids how machines pass motion from one part to another.

What is an example of a lever for kids?

A seesaw is the easiest lever for kids to understand: a board balanced on a pivot point called a fulcrum. Other examples kids can try include a spoon prying the lid off a container, a wrench turning a nut, a bottle opener, a broom, tongs and a wheelbarrow. A quick home test is to balance a ruler on a marker and lift a small toy, then slide the marker to see how the effort changes.

Is a screwdriver a simple machine?

Yes. A screwdriver is a wheel and axle. The wide handle is the wheel and the narrow shaft is the axle. Turning the large handle a small amount produces a strong twist at the thin tip, which is why it is easier to turn a screw with a screwdriver than by pinching the shaft. The screw it drives is a second simple machine, so the pair makes a great first lesson.

How is a screw an inclined plane?

A screw is an inclined plane wrapped around a post. The spiral thread is a long, gentle ramp that winds around the shaft. Each turn moves the screw forward a small distance with less force than pushing it straight in. Kids can see this by cutting a paper triangle, coloring the long edge, and rolling it around a pencil. The colored edge forms a spiral that looks just like a screw thread.

What are good simple machine activities for preschoolers?

Preschoolers do best with short, hands-on experiments. Try ramp races with toy cars on a tilted book, a ruler-and-marker seesaw, turning big gears and watching which way they spin, tightening chunky bolts with a toy wrench, and slicing play dough with a kid-safe knife to see how a wedge works. Keep each activity under 15 minutes, name the machine once, and let them repeat it as often as they like.

What toys teach simple machines?

Toys that teach simple machines let kids feel force and motion directly. Good options include toy tool sets with wrenches, screwdrivers and bolts, gear sets, ramps and marble runs, toy cars and trucks with real axles, building kits with wheels and pulleys, and wooden blocks for building inclined planes. Choose toys rated for your child's age, and use household items like spoons, rulers and cardboard to fill any gaps.

Kids Tool Sets editorial team. We write practical, no-hype guides to kids tool sets, workbenches and screen-free play, built on public safety guidance and what parents tell us. How we work.

References and sources

  1. CPSC: Small Parts Ban and Choking Hazard Labeling
  2. CDC: Developmental Milestones (Learn the Signs. Act Early.)
  3. NAEYC: Play
  4. Nemours KidsHealth: Choosing Safe Toys
  5. Yogman et al., The Power of Play, Pediatrics (AAP clinical report, 2018)

A kids tool set that turns into a workbench

152 pieces, a real working drill and a toolbox that opens into a bench and seat. $69 (was $109), or two for $119. Free US shipping.

See the BuildBox